环境，ubuntu14.04 我没有用window是没有vs2012，按照这个文档的步骤即可：
XXXXXXXXXXXXXXXXXXXXXXXXXXXX/XXXXXXXXp?title=Building_Dolphin_on_Linux

先安装一些库：
12.04 (LTS)
Follow this step for Ubuntu 12.04 (LTS).
You need to install a g++ version with C++0x/C++11 support, so install this PPA first:
sudo add-apt-repository ppa:dolphin-emu/gcc-4.8-precise
sudo apt-get update
This PPA will update libstdc++6 package too, which is an important component from the system, so be careful and use at your own risk.
Cmake needs to be updated too:
sudo add-apt-repository ppa:kalakris/cmake
sudo apt-get update
Now, install all necessary packages by running the following command:
sudo apt-get install cmake git gcc-4.8 g++-4.8 pkg-config libao-dev libasound2-dev libbluetooth-dev libgl1-mesa-dev libgtk2.0-dev liblzo2-dev libopenal-dev libpulse-dev libreadline6-dev libsdl1.2-dev libsoil-dev libsoundtouch-dev libusb-1.0-0-dev libxext-dev libxrandr-dev zlib1g-dev

14.04 (LTS)
Follow this step for Ubuntu 14.04 (LTS).
Install all necessary packages by running the following command:
sudo apt-get install cmake pkg-config git g++ libao-dev libasound2-dev libavcodec-dev libavformat-dev libbluetooth-dev libgtk2.0-dev liblzo2-dev libopenal-dev libpolarssl-dev portaudio19-dev libpulse-dev libreadline6-dev libsdl2-dev libsfml-dev libsoil-dev libsoundtouch-dev libswscale-dev libusb-1.0-0-dev libwxbase3.0-dev libwxgtk3.0-dev libxext-dev libxrandr-dev zlib1g-dev

14.10 and newer
Follow this step for Ubuntu 14.10 and future versions.
Install all necessary packages by running the following command:
sudo apt-get install cmake pkg-config git g++ libao-dev libasound2-dev libavcodec-dev libavformat-dev libbluetooth-dev libgtk2.0-dev liblzo2-dev libminiupnpc-dev libopenal-dev libpolarssl-dev portaudio19-dev libpulse-dev libreadline6-dev libsdl2-dev libsfml-dev libsoil-dev libsoundtouch-dev libswscale-dev libusb-1.0-0-dev libwxbase3.0-dev libwxgtk3.0-dev libxext-dev libxrandr-dev zlib1g-dev


楼主是14.04的机器，就按照14.04的方法安装就行了

安装完成之后git clone 代码

git clone XXXXXXXXXXXXXXXXXX/dolphin-emu/XXXXXXXXXXt

下载代码大概要30~40分钟左右，不必科学上网，github可以访问的

下载完成后再dolphin的代码目录里面建立一个build目录

mkdir Build && cd Build
在里面执行：

cmake ..
make
接着就是编译的过程，这个模拟器似乎比psp的模拟器小，编译很快，大概10分钟就可以编译完成了

编译完成之后，执行sudo make install 就开始安装，安装了之后，在命令行敲一个dolphin-emu就可以把模拟器跑起来

wii游戏资源可以在3DM这些网站上面找，楼主玩的是《零真红之蝶》，试着跑了一下，还是挺流畅的，按键设置可以参考一下这个。我按照贴吧的方式设置的

wii的CPU是IBM搞的PowerPC架构，用PC来模拟绰绰有余，用ARM来搞，就有些吃力了，所以这个模拟器的手机版还在alpha阶段。

不过网上也可以下载得到。

后面会花一点时间看看这东西的代码，看看能不能搞到Android盒子上，这样就可以做出一台Android的wii主机了[s::lol]

另外感觉这个模拟器似乎比psp的模拟器要高效一些，可能渲染流程与psp的不同，要研究一下

这个不错感谢分享。

把wii看成了wifi，瞎狗眼了